nocomments

How To Replace Burner Tubes On Weber Summit Grill

Disclaimer: There are affiliate links in this post. At no cost to you, I get commissions for purchases made through links in this post.

How To Replace Burner Tubes On Weber Summit Grill

How To Replace Burner Tubes On Weber Summit Grill? It seems like every grill retailer has a whole line of different models. They have models for every type of person. But no matter what you’re looking for, there’s always a Weber Summit Grill on the market.

It’s safe to say that this is one of the most popular grills on the market today. One thing you might be wondering is how do you replace burner tubes on a Weber Summit Grill? Wondering if it’s even possible? Well, here’s your answer! Here is a step-by-step guide on replacing burner tubes in your Weber Summit Grill.

What Is The Weber Summit Grill

The Weber Summit Grill is a gas grill that you can cook with propane or natural gas. They are among the top grills available in the market currently. These gas grills ease up your life to a large extent.  There are two sizes to choose from, the 22.5 inches and the 23.5 inches. They also have a few different models, such as the Summit Charcoal Grills and Summit Outdoor Grills.

Next, you want to track down two comparable measured boards to act as the barbecues. There are a few racks inside the stove. To save yourself from the need to resize the board’s attempt to pick boards that are a fitting size for your requirements.

Use wire for integrating everything. There are some old fencing wire, yet you can chose not to use it. You can destroy another broiler rack for the wire. Brake the welds that hold the rack together and the ground of the burrs (fencing wire would have been a lot simpler as it ended up).

You may use weighty wire or pole for handles. You can utilize the casing from the stove rack that you took the wire from.

How Do You Replace Burner Tubes On A Weber Summit Grill

To replace burner tubes on your Weber Summit Grill, you will need first to remove the grill from the unit. This means that you have to detach the top of the unit and then detach the bottom of the unit. After this, you will need to unscrew all four bolts that hold in the burner tubes. Now that all four screws are out, you can remove the burner tubes from their holders.

You should now be able to pull out one burner tube at a time and place it back into its holder. Your new burner tubes should be easily inserted into their holders. When it comes time to put your grill back together, reverse what you did with taking it apart. That’s pretty much how simple it is to replace burner tubes on a Weber Summit Grill!

The Process Of Removing The Old Burner Tubes

  1. Turn off the grill
  2. Open the “Door Latch” of your grill
  3. Remove the two bolts that are located on top of the door latch
  4. Unscrew the two screws that are located in the burner tube from step 2
  5. Remove the old burner tubes and replace them with new ones

Putting In The New Burner Tubes To Replace Burner Tubes On Weber Summit Grill

First, you need to remove the original burner tubes from the grill. You should find the screws used for removing the old ones on each side of the grill. Remove those screws and unscrew the old burner tubes from the grates with a screwdriver.

Next, lift on one of the new burner tubes and position it in the place where your old one was. Once you’ve done that, use a Phillips head screwdriver to tighten down on one end of the tube carefully so it doesn’t rotate while you’re screwing in the other end.

How To Maintain Weber Grills 

Step 1: Remove the grill from the cart and power it up.

Step 2: Use a Phillips screwdriver to remove the screws on each burner tube. These screws hold the burner tubes in place.

Step 3: Once you have removed all of the screws, use your hands to pull the burner tubes off of their brackets carefully.

Step 4: Next, insert your new burner tubes into their respective brackets and use your screwdriver to re-tighten each one. Make sure that they are tight enough to not fall off while cooking, but not too tight that they break when you remove them later on.

Step5: make sure that you clean all the grill parts thoroughly. 

How To Keep The Weber Grills Last Longer To Replace Burner Tubes On Weber Summit Grill

There are a few different ways to prevent your Weber Summit Grill from rusting. One way is to use silicone spray on the inside of the burners. Another way is to coat the outside of the grill with a high heat paint like Enamel-Bonded Metal Paint. Some grill manufacturers use anodized aluminum as their main material. This prevents your grill from rusting and getting pitted in places liquids pool. All of these methods work well, but they’re not foolproof.

The best way to keep your Weber Summit Grill in good shape is by replacing the burner tubes regularly. The plastic tubes will start to break down over time, and you’ll notice that the heat doesn’t distribute properly throughout the grill anymore. Replacing burner tubes ensures that your Weber Summit Grill will last longer and produce more reliable results than if you don’t replace them often enough. 

To use this barbecue you should allow the fire to torch to gleaming coals with as little fire as you can make due. While the fire is torching you can warm up the barbecue to consume off any soil that may have collected on it.

At the point when you have a few decent coals going, orchestrate them so they will give even hotness to the barbecue. Get a few logs or shakes to help the barbecue over the coals. Ensure it is not closed or the food will be consumed. Most people find that around 200-300mm is fine.

Give the barbecue a brush down to remove residue, and open it up. Organize the hotdogs on one side, and afterwards close the opposite side over them and lock the handles together. How To Make A Campfire Grill Grate? 

Place the barbecue over the fire and watch it cook. At the point when one side is done, turn the entire part finished. You may have to calibrate the place of the barbecue or change the coals to get the right hotness. That is all essential for good times.

At the point when the meat is cooked, open the barbecue and remove the hotdogs. They will be hot and they stick some of the time so utensils may prove to be useful.

Conclusion

One of the best ways to care for your grill is to keep it in good working condition. To get the most out of your grill, it’s important to replace the burner tubes. These tubes will allow the charcoal to heat up evenly and provide the best cooking experience. With this process, you can enjoy your grill for a long time.

Tags: